BASECNTSRC=DISABLED, WRAPCNTSRC=DISABLED, TOUT1MODE=FREE, ZEROSTARTEN=X0, OSMEN=X0, PRECNTSRC=DISABLED, DEBUGRUN=X0, TOUT1SRC=DISABLED, TOUT0SRC=DISABLED, TOUT0SYNCSRC=DISABLED, TOUT0MODE=FREE, TOUT1SYNCSRC=DISABLED
No Description
| DEBUGRUN | Debug Mode Run Enable 0 (X0): PROTIMER is frozen in debug mode 1 (X1): PROTIMER is running in debug mode |
| DMACLRACT | DMA Request Clear on Active |
| OSMEN | One-Shot Mode Enable 0 (X0): Protimer continues to count when WRAP counter overflows. 1 (X1): Protimer stops counting when WRAP counter overflows. |
| ZEROSTARTEN | Start from zero enable 0 (X0): Protimer starts from the previous count value 1 (X1): Protimer starts counting from zero |
| PRECNTSRC | Selects clock to Pre-counter 0 (DISABLED): Disable Pre-counter 1 (CLOCK): Module clock 2 (UNUSED0): Do not use 3 (UNUSED1): Do not use |
| BASECNTSRC | Selects clock to Base counter 0 (DISABLED): Disable base counter 1 (PRECNTOF): Pre-counter overflow events 2 (UNUSED0): Do not use 3 (UNUSED1): Do not use |
| WRAPCNTSRC | Selects clock to Wrap counter 0 (DISABLED): Disable Wrap counter 1 (PRECNTOF): Pre-counter overflow events 2 (BASECNTOF): Base counter overflow events 3 (UNUSED): Do not use |
| TOUT0SRC | Selects clock to timeout counter 0 0 (DISABLED): No counting 1 (PRECNTOF): Pre-counter overflow events 2 (BASECNTOF): Base counter overflow events 3 (WRAPCNTOF): Wrap counter overflow events |
| TOUT0SYNCSRC | Select timeout counter 0 event 0 (DISABLED): No synchronization 1 (PRECNTOF): Pre-counter overflow event 2 (BASECNTOF): Base counter overflow event 3 (WRAPCNTOF): Wrap counter overflow event |
| TOUT1SRC | Selects clock to timeout counter 1 0 (DISABLED): No counting 1 (PRECNTOF): Pre-counter overflow events 2 (BASECNTOF): Base counter overflow events 3 (WRAPCNTOF): Wrap counter overflow events |
| TOUT1SYNCSRC | Select timeout counter 1 event 0 (DISABLED): No synchronization 1 (PRECNTOF): Pre-counter overflow event 2 (BASECNTOF): Base counter overflow event 3 (WRAPCNTOF): Wrap counter overflow event |
| TOUT0MODE | Repeat Mode 0 (FREE): When started, the TOUT0 counts down until it is stopped by software 1 (ONESHOT): TOUT0 is stopped after it reaches zero |
| TOUT1MODE | Repeat Mode 0 (FREE): When started, the TOUT1 counts down until it is stopped by software 1 (ONESHOT): TOUT1 is stopped after it reaches zero |